5.To turn the heater off, the ‘O’ setting needs to be selected. This will turn the heater off, and the power indicator light will go out.
NOtE: there is a tip over switch fitted to this heater. When the heater tips over it will automatically turn off. the heater will need to be placed back into the upright position and the start sequence and desired temperature settings selected again.
tHERmO gUaRD OvERHEatINg SafEtY DEvICE
Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect for blockages in air inlet or outlets. Wait at least five minutes for the protection system to reset before attempting to restart the heater.
If the heater fails to operate or the safety device switches off again, return the heater to your nearest service centre for examination or repair.
CaRE aND maINtENaNCE
•Always turn off and then unplug the heater before cleaning.
•Use only a clean, dry cloth to clean the external surfaces of the heater only.
•If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a qualified service agent. Do not operate the heater in this condition.
•Do not attempt to open the case of the
heater at any time there are no customer serviceable parts inside.
•When not in use, pack the heater, preferably in its original box for best protection and store in a cool, clean and dry location.
•The air filter at the rear of the heater can be easily cleaned by removing the filter casing panel and removing the mesh filter. A basic clean in warm water to remove any build up is adequate and allow time to completely dry before replacing the filter and the filter casing panel.
