Setting the Heat Temperature
Your 6 heat controller features an ON/ OFF slide switch plus an easy to use dial to select the temperature setting.
To switch the blanket on, move the switch in a downward direction to the ‘ON’ position.
Adjust the heat temperature by rolling the dial to select the desired temperature setting between 1 and 6.
Setting 1 is the lowest setting and 6 is the highest. The 6 settings allows you to choose the right balance of heat depending on your personal requirements. The numbers on the electric blanket controller correspond to the following temperatures:
NOTE: Use the high heat setting to preheat your bed only.
The heat setting display screen is illuminated when the blanket is turned on, to enable easy adjustment in the dark.
To switch the blanket off, move the switch in an upward direction to the ‘OFF’ position.
NOTE: On initial use it is recommended that the blanket be set on ‘6’ for 3 hours before sleeping on the bed. This will assist in drying out any moisture which has been accumulated in the mattress.
You may notice an odour when using the electric blanket for the first time, due to the insulation material. This is harmless and will subside quickly.
It is recommended that you do not sleep on the electric blanket when it is switched on. Should you choose to leave your blanket on all night; setting 1 can be used.
Your blanket has a detachable controller and waterproof element which makes your blanket safe to machine wash.
9
KEB413_IB_FA.indd 9 | 12/10/09 10:03 AM |
