Operating Instructions continued
•Switch the power ‘off’ at the power outlet, unplug the power cord, remove all steam pressure and allow the appliance to cool.
•Do not remove the water tank cap or the filter holder until the steam pressure in the appliance has been released. The Pressure Indicator Button should drop down and be flush with the top of the water tank cap.
WARNING: To avoid splattering of hot milk, do not lift the steaming nozzle above the surface of the milk while frothing.
Ensure the selector control is in the ‘standby’ position before removing the frothing jug.
How to Release the
Steam Pressure
•Switch the power off at the power outlet and unplug the power cord.
•Place the frothing jug under the steam nozzle.
•Turn the selector control to the ‘STEAM’ position and allow all steam and residual water to completely drain off into the jug until all flow and sound ceases. The steam pressure is now removed.
•Turn the selector control to the ‘BREW’ position to ensure steam pressure is removed, then turn back to the ‘STANDBY’ position.
•The Pressure Indicator Button should drop down and be flush with the top of the water tank cap. (See Fig.5)
Pressure
Indicator
Down
Fig. 5
WARNING: The metal parts of the filter holder might still be very hot. Cool down these parts by running under cold water.
To avoid possible burns from hot steam and water, never remove the water tank cap or the filter holder while there is steam pressure in the water tank. Remove all steam pressure first.
Never let coffee or water level in a cup reach the pouring nozzle of the filter holder.
10