Kambrook Recommends Safety First
IMPORTANT: Please retain your instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
Important Safeguards For Your Kambrook Easy Step Cappuccino Maker
•Do not immerse cord, plug or Easy Step Cappuccino Maker body in water or any other liquid.
•Always use the appliance on a dry, level surface.
•Before use fully unwind the power cord.
•Do not place this appliance on or near a hot gas or electric burner, or where it could touch a heated oven.
•Always turn the Selector Control to ‘STANDBY’, switch the power off at the power outlet and then remove the plug
when the appliance is not being used and before cleaning.
•Do not leave the appliance unattended when in use.Young children should be supervised to ensure that they do not play with the appliance.
•This appliance is for household use only.
•Do not use this appliance for anything other than its intended use. Do not use outdoors.
•Do not touch hot surfaces. Use handles.
Special Safety Instructions
•The
•Only use cold water in the water tank. Do not use any other liquid.
•Never use the appliance without water in it.
•Ensure the water tank cap and filter holder are firmly secured when using the appliance.
•Always ensure the water tank cap is clean around the seal and the centre valve area (never use if the seal is damaged or faulty).
•As part of regular maintenance, it is recommended that this appliance be taken to the nearest authorised Kambrook Service Centre for checking of the ‘Pressure Indicator Button’ once every two years.
•Before removing the Water Tank Cap ensure the Pressure Indicator Button has dropped down and is flush with the top of the cap.
•To avoid possible burns from hot steam and water, never remove the water tank cap or filter holder while there
is steam pressure in the water tank. Remove all steam pressure first.
•Refer to Page 10 for instructions on how to release the steam pressure.
4