Kambrook KES110 manual Care and Cleaning, It is Essential to Clean the Steam System after Each Use

Care and Cleaning

It is Essential to Clean the Steam System after Each Use

•Ensure the Selector Control is in the ‘STANDBY’ position and the steam pressure has been released.

•Remove the froth enhancer from the steam tube and nozzle for cleaning and wipe the steam tube and nozzle with

a damp cloth.

•Remove the steam nozzle from the steam tube by unscrewing in a counter-clockwise direction using the cleaning tool provided (Fig. 7). Clean the steam nozzle by removing it and letting water run through it for about 10 seconds in the direction opposite to the normal steam flow. If the nozzle is still blocked clean it with the other end of the cleaning tool provided (Fig. 8).

•Turn the Selector Control to ‘STEAM’ and allow the appliance to produce steam for 4-5 seconds to clear the steam tube. The filter holder does not have to be locked into position.

•Turn the Selector Control to ‘STANDBY’, switch off at the power outlet, remove the plug and allow the appliance to cool.

•Remove all steam pressure by following the instructions on Page 10.

•After the steam pressure has been released, remove the water tank cap and discard the remaining water (always empty the water tank between uses).

•The steam nozzle must be screwed back onto the steam tube in a clockwise direction and tightened using reasonable force with the end of the cleaning tool provided.

•The filter holder, stainless steel filters and drip tray can be washed with soapy water. The drip tray consists of 2 parts and can be removed for easier cleaning. (Fig. 6).

Fig. 6

Fig. 7 Fig. 8

NOTE: Do not place any of the components in the dishwasher.

14