For each ON time and each OFF time, the day, hours and minutes must be set.
Press the PROG Button once to set the first ON time – you will see ON and number “1” appear on the left of the LCD display.
This indicates that you can now enter the first ON time. Press the DAY button to choose the required day, or block of days and then set the hour and minutes using the HOURS and MIN buttons.
When you have completed setting the required ON time press the PROG button to validate the entry and move onto the first OFF time – you will see OFF and the number “1” appears on the left of the LCD display.
This indicates that you can now enter the first OFF time by using the DAY, HOURS and MIN buttons as above. Press the PROG button to validate this entry.
Repeat for the remaining 7 ON /OFF settings as required. When you have set the required ON / OFF settings, press the CLOCK button to return the display to the clock.The Timer will now be ready to operate.
To activate the timing programs, set the timer to Auto off Mode, by pressing the MANUAL button. For details, please read the MANUAL OVERRIDE section.
Note that you can check the settings you have programmed by pressing the PROG button repeatedly – each setting will appear on the screen.
When checking your programs, ensure that the settings do not overlap, especially when using the block option.
