Using Your Kambrook Arctic Remote Controlled Tower Fan
Before First Use
Remove any promotional material from the fan.
IMPORTANT: When unpacking the fan, check to see you have received all the items listed in the Parts List, before discarding the packaging.
Assembling Your Arctic
Remote Controlled
Tower Fan
Base Assembly
1.Turn the Tower body upside down, and remove the fastening screws from the bottom of the tower.
2.Thread the power cord through the half base (a) square opening. Position the half base (a) onto the support posts, located on the bottom of the tower body.
(b)(a)
3.Pull and place the power cord across the already positioned half base (a), positioning it into the cord track. Then align the other half base (b) over the support posts, and slightly over the already positioned half base (a). Firmly push down on the half base
(b) until the bases are locked in place and flush. (Fig. 2)
Fig. 2
4.Secure the joint base to the Tower Body with the fastening screws.
5.Check the power cord is still located in the cord track.
6.Turn the tower over to the upright position, it is now ready for use.
Fig. 1
7
