18.To prevent a possible fire or heat damage, allow ample space around the heater (at least1.7m at front and 0.5m at the rear, top and sides) and do not totally or partially block air inlets or outlets in any manner. Check the openings from time to time for accumulated dust. Ensure long shag carpet does not obstruct airflow under the unit.
19.Do not touch hot metal surfaces.
20.Switch off at the control switch and power outlet, then unplug and allow heater to cool down before cleaning or storing.
21.Use this heater only as described in this instruction manual. Any other use not recommended by the manufacturer may cause fire, heat damage, electric shock or injury and voids all warranties.
22.Regularly inspect the supply cord, plug, control settings, air inlets and outlets and main housing for any damage. If found damaged in any way, immediately cease use of the heater and return to Kambrook or an authorized service agent for inspection.
23.The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit. See your electrician for professional advice.
HOW TO OPERATE
1.Remove your heater from its carton and associated protective wrapping, unwind the cord to its full length and remove any protective cardboard or foam that may have been used to minimise transportation damage.
2.Place the heater on a firm, level surface in a stable upright position.
3.Visually inspect the air inlet and outlets to ensure no foreign material is blocking these areas.
4.Make certain the selector knob is turned to OFF “O” and the temperature knob to HIGH (KFH29 and KFH31 only).
5.Plug the power cord in a
6.Control the heater with the selector knob and temperature knob, as follows:
The selector knob has 4 settings:
O Shuts off both heater and fan
*Turns fan on and gives cool air
1Gives warm air with half heating power
2Gives hot air with maximum heating power
4
