25Using the Oven
3How to use the clock functions
���After a clock function has been selected, the corresponding function flashes
for about 5 seconds. During this period, the desired times can be set or modi-
fied using the or button.
•When the desired time has been set, the function continues to flash for
approx. 5 seconds. After that the function is then lit. The set time begins to
run.
•With Countdown the oven must also be switched on in order to set the clock
function.
•By pressing and at the same time, the time set can be reset.
3Checking the time set or remaining
Press the Selection button repeatedly, until the appropriate clock function
flashes and the time set or remaining is displayed.
2Using residual heat with the Cook time and End time clock func-
tions
When the Cook time and End time clock functions are used, the oven
switches the heating elements off, when 90% of the time set or calculated has
elapsed. The residual heat present is used to continue the cooking process until
the time set has elapsed (3 to 20 mins.).