Should this occur, switch off at the power outlet and unplug. Allow the kettle to cool down before refilling.The safety device will automatically reset when the kettle has cooled down.
For additional safety your kettle is fitted with an additional thermal cut out. In the event of overheating, the kettle will automatically shut down to prevent further damage. Should this occur, take your kettle to an authorised Kambrook Service Centre.
Maintaining Your Kambrook Stainless Steel Cordless Kettle
Always switch appliance off, then switch off at the power outlet and then unplug before cleaning the appliance.
WARNING: DO NOT IMMERSE the appliance, power cord, base or plug in water or any other liquid
Cleaning the Polished Exterior & Removable Filter
The stainless steel surface may be wiped over with a damp cloth and polished with a soft clean dry cloth.
Note: Do not use chemicals, steel wool, or abrasive cleaners to clean the outside of the kettle
The filter fitted inside the kettle over the spout is removable by sliding in and out of position. Ensure the kettle and water have cooled down before attempting to clean the filter.
The filter can be washed in warm, soapy water.
Mineral deposits and discolouration
Due to the large surface area of the concealed element interior base, discolouration due to mineral deposits will appear more obvious.The mineral deposits can leave a brown stain on the base.THIS IS NOT RUST.
To remove the discolouration follow the cleaning instructions “Removal of mineral deposits”.
Removal of Mineral Deposits
Mineral deposits in tap water may cause the kettle interior to discolour over time. This may be removed by using a kettle descaler which is available from most leading supermarkets, department and hardware stores.
Alternatively: Fill the kettle with 3 cups of white vinegar and the remainder (up to 2/3 of maximum) with water, boil and allow to stand overnight.
Empty the solution from the kettle. Fill the kettle with clean water, bring to the boil and discard the water. Repeat and the kettle will be ready for use.
