Using Your Kambrook Stainless Steel Cordless Kettle
Before first using your Kambrook Cordless Stainless Steel Kettle, we recommend that the kettle is filled to the maximum level, boiled and water discarded.Your kettle will only operate when positioned on the
To fill the kettle, remove it from the multi- directional base and open the lid. Fill with the desired amount of water. Never fill the kettle above the ‘MAX’ mark, which is indicated inside the kettle.Too little water will result in the kettle switching “OFF” before the water has boiled.
Note: Do not fill above the MAX mark as boiling water may splash out from the kettle.The max line is shown on the red indicator inside the kettle.
Ensure the lid is firmly in place before
placing the kettle on the
Position the kettle on the
Once the water has boiled the kettle will automatically switch “OFF”. Lift the kettle from the
Note:This kettle must only be used with the multi- directional base supplied. Use caution when pouring water from your kettle as boiling water will scald.
CAUTION:
•Do not operate the kettle on an inclined surface
•Do not operate the kettle without water
•Do not move the kettle while it is switched ‘on’
•Do not remove the lid while water is boiling
•Do not use the kettle to heat or boil any liquid or foodstuff other than water
•Ensure the kettle is switched ‘off’ before it is removed from the base
The kettle may be stored on the multi- directional base when not in use.The power should be switched off at the power outlet and then unplugged when not in use.
This kettle is fitted with a safety device, which protects against overheating should your appliance be operated with insufficient water. If this occurs the kettle will stop heating and automatically switch “OFF”.
