page 4.22

4. Using the menus Digital Projection LIGHTNING 35HD User Manual
Notes
The eight buttons of the Main
menu are always visible at the
bottom of the display.
To go back to a previous menu
option that is no longer visible,
call up the menu again using
the appropriate Main menu
button.
On earlier models, known as
‘Stage 1’ models, only Single
DVI-D on input A was available.
On later models, from ‘Stage 2’
onwards, Dual, Twin and Dual
Twin DVI-D inputs are also
available.
For more information about
input formats, see section 2.
Installation, Input formats.
Source menu
Press the SOURCE button on the Main menu:

Source select

Single DVI-D (Stage 1 model):
A IN (single mode)
Single DVI-D (Stage 2 model only):
Select from: A IN (single mode) or B IN (single mode)
Dual DVI-D (Stage 2 model only):
Select from: A IN (dual mode) or B IN (dual mode)
Twin Link (Stage 2 model only):
A single input using both: A IN (single mode) AND B IN (single mode)
Dual Twin (Stage 2 model only):
A single input using both: A IN (dual mode) AND B IN (dual mode)
10 Bit or 12 Bit (Stage 2 model only):
When using Twin Link or Dual Twin, select either 10 bit or 12 bit image depth

DVI Repeater on/off

Turns the DVI loop-through ON or OFF
Source menu
Controls
Source select
Menu buttons...
Shutter open
Shutter close
DVI repeater on
DVI Repeater off
Advanced menu