page 6.13
Digital Projection LIGHTNING 35HD User Manual 6. Appendix

Image Contrast

Used to set and query image contrast (gain) levels.
CALL : "image,contrast,write,r,[r level],g,[g level],b,[b level],o,[level],a,[mode]"
: Where [level] is 0.0 to 2.0 in steps of 0.001
: and [mode] is either "on" or "off"
: 'o' is overall level - only valid if 'a' is set to 'off'.
: 'a' is auto level control.
RETURNS : "[msg id],ACK,contrast,r,[r level],g,[g level],b,[b
level],o,[level],a,[mode]"
: OR
: "[msg id],NAK,contrast"
CALL : "image,contrast,read,[urgency switch]"
NOTE : Urgency switch is currently ignored (can be set to 0).
RETURNS : "[msg id],contrast,[r level],[g level],[b level],[o level],[a mode]"
: OR
: "[msg id],NAK,contrast"

Image Projection Mode

Used to set and query image projection mode.
CALL : "image,projectionmode,write,[mode]"
: Where [mode] is one of "curtain", "testpattern" or "normal"
RETURNS : "[msg id],ACK,projectionmode,[mode]"
: OR
: "[msg id],NAK,projectionmode"
CALL : "image,projectionmode,read,[urgency switch]"
NOTE : Urgency switch is currently ignored (can be set to 0).
RETURNS : "[msg id],projectionmode,[mode]"
: OR
: "[msg id],NAK,projectionmode"
Notes