ÎSTEP 6:
Unlock the trigger gun safety lock. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
ÎSTEP 7:
Slide the throttle control to the RUN position.
ÎSTEP 9:
Pull the starter handle.
If the engine fails to start after
3 pulls, squeeze the trigger gun to release pressure, and repeat step.
ÎSTEP 8:
Push the primer ball three times. Wait 3 seconds between each push. Note: in cold weather push 5 times. For engine details see engine manual.
USING THE ACCESSORIES
High / Low pressure nozzle
This nozzle features two positions. The high setting provides a steady powerful 25° high pressure spray pattern, for general cleaning. The low setting cre- ates a wider 40° low presure pattern. Note: Detergent is applied with the noz- zle set at low pressure.
WARNING
To avoid serious injury never point spray nozzle at yourself, other per- sons or animals.
English 7