English 7
ÎSTEP 8:
Attach the high pressure hose to the
spray gun.
CAUTION
Do not run the engine with a high or low
oil level as this can cause engine dam-
age.
If you have further questions regarding
the engine, please refer to the engine
manual included with the unit.
ÎSTEP 1:
Check oil level. Oil level should al-
ways be between the “FULL” and
“ADD” marks on the dipstick.
Be sure the machine is level when
checking the oil level. (Refer to the
engine’s operating manual for sea-
sonal grades.).
We recommend that the oil be
changed after the first 5 hours of
use, then once every 50 hours.
ÎSTEP 2:
Fill gas tank with unleaded gasoline.
Do not use leaded gasoline.
ÎSTEP 3:
Connect the high pressure hose to
the unit’s high pressure outlet.
ÎSTEP 4:
Connect garden hose to unit’s water
inlet.
ÎSTEP 5:
Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.
Do not use hot water.
ÎSTEP 6:
Unlock the Safety lock. Trigger the
gun to eliminate trapped air, wait for
a steady flow of water to emerge
from the spray nozzle.
ÎSTEP 7:
Open fuel valve.
Pull the choke rod to the ON position
(on a warm engine, leave the choke
rod in the OFF position).
ÎSTEP 8:
Move the engine stop switch to the
ON position.
For engine details see engine manu-
al.
ÎSTEP 9:
Pull the starter handle.
If the engine fails to start after
3 pulls, squeeze the trigger gun to
release pressure, and repeat step.
After the engine warms up enough to
run smoothly, move choke rod to
OFF position.
OPERATING INSTRUCTIONS