10 English
ÎSTEP 1:
Move the engine stop switch to the
OFF position.
For engine details see engine manu-
al.
ÎSTEP 2:
Release trigger and engage gun
safety lock.
ÎSTEP 1:
Remove detergent suction tube from
container and insert into 1 gallon of
fresh water.
Siphon water at low pressure for one
minute.
ÎSTEP 2:
Move the engine stop switch to the
OFF position.
Close the fuel valve.
ÎSTEP 3:
Turn off the water source.
ÎSTEP 4:
Press trigger to release water pres-
sure.
ÎSTEP 5:
Release trigger and engage gun
safety lock.
ÎSTEP 6:
Disconnect the garden hose from
the water inlet on the unit.
ÎSTEP 7:
Disconnect the high pressure hose
from the high pressure outlet.
Î1: Disconnect all water connections.
Î2: Turn on the machine for a few
seconds, until the water which had
remained in the pump exits, turn off
immediately.
Î3: Do not allow high pressure hose
to become kinked.
Î4: Store the machine and accesso-
ries in a room which does not reach
freezing temperatures. DO NOT
store near furnace or other sources
of heat as it may dry out the pump
seals.
CAUTION
Failure to follow the above directions
will result in damage to the pump as-
sembly and accessories.
Kärcher also recommends the regular
practice of using a pump protector like
“Kärcher Pump Guard” to help during
storage in the winter months.
TAKING A BREAK ..five minutes or moreSHUTTING DOWN & CLEAN-UPWINTERIZING AND LONG-TERM STORAGE