Cleaning and care
Before any cleaning or maintenance work the cooker hood must be dis- connected from the mains supply. Ensure that:
–it is switched off at the wall socket and the plug has been withdrawn (do not pull on the cable, only on the plug), or
–the fuse has been withdrawn from the fused spur connection unit, or
–the mains fuse is withdrawn, or
–the
Housing
Warning: The surfaces and controls are susceptible to scratches and ab- rasion. Please observe the following cleaning instructions:
All external surfaces and controls can be cleaned using warm water with a little washing up liquid applied with a soft sponge.
Wipe dry using a soft cloth.
Do not use too much water when cleaning the controls. Water could penetrate into the electronics and cause damage.
Avoid:
–cleaning agents containing soda, acids or chlorides,
–abrasive cleaning agents, e.g. pow- der cleaners or cream cleaners,
–abrasive sponges, e.g. pot scourers or sponges which have been pre- viously used with abrasive cleaning agents.
These will damage the surface material.
Stainless steel
Stainless steel surfaces can be cleaned using a proprietary
To help prevent
Apply sparingly with an even pressure.
Amicrofibre
Stainless steel coloured controls
These controls may suffer discolour- ation or damage if soiling is left on them for too long.
Remove any soiling straight away.
Do not use stainless steel cleaning agents on these types of controls.
16