Installation
Recirculation
If site conditions are not suitable for the cooker hood to be used for air extrac- tion the appliance must be connected for recirculation.
Extension piece
An extension piece allows the cooker hood to be fitted at varying distances from the ceiling (see section appliance dimensions).
The extension piece has openings at each side. These are needed for venti- lation when the appliance is being used in recirculation mode.
Push the directional unit on to the top retaining plate.
Recirculation |
Extraction |
Secure the flexible hose supplied to the directional unit and to the reduc- ing collar on the motor unit using hose clips.
Insert the recirculation active char- coal filters (see section "Cleaning and care").
The recirculation active charcoal fil- ters necessary for recirculation are available from the Spare Parts De- partment or your dealer.
For recirculation the extension piece is fitted with the openings at the top.
For air extraction the openings are not required. In this case the extension piece is fitted with the openings at the bottom. They are then covered by the tower.
30
