Installation
At a maximum distance of 365 mm from the ceiling, hold retaining plate C against the wall and use the not- ches to align it with the middle line. Mark the two drill holes.
Drill two 8 mm ø holes into the wall and press the S8 plugs into the holes.
Screw on retaining plate C with two 5 x 40 mm screws.
Canopy
Before fitting the canopy the glass cover of the lighting tube must first be removed (see relevant section in "Cleaning and care").
Hang the canopy on the angle brackets on retaining plate A.
Secure the canopy. Secure the ca- nopy with 5 x 40 mm screws into each drilled hole.
DA
Secure the canopy with a 5 x 40 mm screw.
DA
Secure the canopy with two 5 x 40 mm screws.
Replace the glass cover.
26
