Miele DA 216-2 EXT, DA 219-2 EXT, DA 217-2 installation instructions Operation

Operation

Setting/altering the active charcoal filter operating hours counter

The active charcoal filters are only used for cooker hoods which are set up for recirculation mode. They are not required for vented extraction.

On delivery the operating hours counter for the active charcoal filters is set to unlimited.

For recirculation mode the operating hours counter needs to be set to the re- quired time:

Press the On/Off touch control to switch the fan off.

Press the run-on option touch control and the active charcoal filter touch control at the same time.

The indicator lamp above the active charcoal filter touch control and one of the lamps above the – /+ touch controls will flash.

The – /+ touch control lamps show the time which has been set:

1st lamp from left = 120 hours 2nd lamp from left = 180 hours 3rd lamp from left = 240 hours 4th lamp from left = unlimited

Use the – /+ touch controls to select the desired time.

Confirm the procedure by pressing the active charcoal filter touch con- trol.

If the procedure is not confirmed within 4 minutes of programming the steps, the cooker hood will auto- matically revert to the "old" data.

15