Miele DA 219-2 EXT, DA 216-2 EXT, DA 217-2 installation instructions Motor unit, Installation

Installation

Motor unit

(not when operating the external fan)

with air extraction

If a non-return flap is not present in the venting system, the non-return flap supplied must be fitted into the exhaust connection in the motor unit. The flaps must open upwards.

The cooker hood is designed to take

ø150 mm exhaust ducting.

If 125 mm ø exhaust ducting has to be used the reducing collar needs to be fitted into the exhaust connec- tion on the motor unit.

(see "Connection for air extraction".

With recirculation mode:

Fit the reducing collar onto the ex- haust connection.

The non-return flap is not required.

First loosely screw the two locking nuts onto the threaded bolts on re- taining plate A.

Leave a gap of approx. 3 mm for hanging the motor on afterwards.

Fit the motor unit onto the hooks on retaining plate A and slide down be- hind the nuts.

Tighten the nuts.

27