Installation
Lightly secure retaining plate A into position using 5 x 40 mm screws through the two holes and use the notches to align with the middle line.
Drill 4 more 8 mm ø holes through the now fitted retaining plate and press S8 plugs into the holes.
Screw two 5 x 40 mm screws into the upper two holes.
Retaining plate B
Hold retaining plate B to the wall and push up until it is directly below the ceiling. Use the notches and the middle line to align it horizontally. Mark the 2 drill holes on the wall.
Drill two, 8 mm ø holes into the wall, and push the S8 plugs into the holes.
Screw on the retaining plate with two 5 x 40 mm screws.
Retaining plate C
Retaining plate C only needs to be fitted if dimension Y is greater than 365
mm.It provides additional stability for the extension piece.
25
