Installation
Control unit | Electrical connection |
(only when operating with an external fan)
Fit the exhaust socket supplied into the canopy. It has an integrated
If a 150 mm ø exhaust ducting is being used, adapt the connection by cutting it off at the join with a sharp knife (see illustration).
The exhaust connection does not need adapting if 125 mm ø ducting is being used.
Secure the exhaust connection to the canopy with four 2 x 13 mm screws.
On EXT model cooker hoods the con- trol unit is fitted instead of the motor unit and then secured with self lock- ing nuts.
Connect the canopy connection cable to the corresponding coup- lings on the left and right of the motor unit or control unit.
Do this by connecting the four pole plug into the rear connection of the coupling on the left of the motor unit or control unit.
Connect the six pole plug into the coupling on the right of the motor unit or control unit.
Secure the cable with the cable holders as illustrated (this does not apply to EXT models).
28
