Cypress CY8C22213 AC Operational Amplifier Specifications, CY8C22x13 Final Data Sheet, June 3

CY8C22x13 Final Data Sheet 3. Electrical Specifications

3.4.3AC Operational Amplifier Specifications

The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and are for design guidance only or unless otherwise specified.

Note Settling times, slew rates, and gain bandwidth are based on the Analog Continuous Time PSoC block.

Table 3-17. 5V AC Operational Amplifier Specifications

Symbol	Description	Min	Typ	Max	Units	Notes
TROA	Rising Settling Time from 80% of ∆V to 0.1% of ∆V (10 pF					Specification maximums for low power and
	load, Unity Gain)					high opamp bias, medium power, and
	Power = Low	–	–	3.9	∝s	medium power and high opamp bias levels
						are between low and high power levels.
	Power = Low, Opamp Bias = High	–			∝s
	Power = Medium	–			∝s
	Power = Medium, Opamp Bias = High	–	–	0.72	∝s
	Power = High	–			∝s
	Power = High, Opamp Bias = High	–	–	0.62	∝s
TSOA	Falling Settling Time from 20% of ∆V to 0.1% of ∆V (10 pF					Specification maximums for low power and
	load, Unity Gain)					high opamp bias, medium power, and
	Power = Low	–	–	5.9	∝s	medium power and high opamp bias levels
						are between low and high power levels.
	Power = Low, Opamp Bias = High	–			∝s
	Power = Medium	–			∝s
	Power = Medium, Opamp Bias = High	–	–	0.92	∝s
	Power = High	–			∝s
	Power = High, Opamp Bias = High	–	–	0.72	∝s
SRROA	Rising Slew Rate (20% to 80%)(10 pF load, Unity Gain)					Specification minimums for low power and
	Power = Low	0.15	–		V/∝s	high opamp bias, medium power, and
						medium power and high opamp bias levels
	Power = Low, Opamp Bias = High				V/∝s
						are between low and high power levels.
	Power = Medium				V/∝s
	Power = Medium, Opamp Bias = High	1.7	–		V/∝s
	Power = High				V/∝s
	Power = High, Opamp Bias = High	6.5	–		V/∝s
SRFOA	Falling Slew Rate (20% to 80%)(10 pF load, Unity Gain)					Specification minimums for low power and
	Power = Low	0.01	–		V/∝s	high opamp bias, medium power, and
						medium power and high opamp bias levels
	Power = Low, Opamp Bias = High				V/∝s
						are between low and high power levels.
	Power = Medium				V/∝s
	Power = Medium, Opamp Bias = High	0.5	–		V/∝s
	Power = High				V/∝s
	Power = High, Opamp Bias = High	4.0	–		V/∝s
BWOA	Gain Bandwidth Product					Specification minimums for low power and
	Power = Low	0.75	–		MHz	high opamp bias, medium power, and
						medium power and high opamp bias levels
	Power = Low, Opamp Bias = High				MHz
						are between low and high power levels.
	Power = Medium				MHz
	Power = Medium, Opamp Bias = High	3.1	–		MHz
	Power = High				MHz
	Power = High, Opamp Bias = High	5.4	–		MHz
ENOA	Noise at 1 kHz (Power = Medium, Opamp Bias = High)	–	200	–	nV/rt-Hz

June 3, 2004 Document No. 38-12009 Rev. *E 25

[+] Feedback