" STEP 5: | " STEP 9: |
Fasten the rubber grommets in the nozzle holder.
Release the collar and push the noz- zle until the collar clicks.
" STEP 6: | WARNING |
Place the quick connect nozzles in | High pressure in nozzle area. |
the nozzle holder. | Risk of injury caused by improperly |
| locked nozzle. |
| ! Make sure you hear a ‘click’ when in- |
| serting the nozzle tip into the wand. |
| ! Pull the nozzle to make sure it is |
| seated properly before operating |
" STEP 7: | your unit. |
|
Attach the wand to the spray gun.
"STEP 10:
Attach the high pressure hose to the spray gun.
"STEP 8:
Pull the
6English
