TV Menu, AUX Menu, Digital in Menu
TV MENU
As a Scart audio/video cable contains both audio and video inputs and outputs in one cable, the Scart connector between the DVD Receiver and the TV can also be used to lead the audio output signals of your TV to the DVD Receiver. In this way your TV programs can be listened to over your HS sound system.
NOTE: Please make sure that the Scart cable used has all pins connected. If not it could be that, only the video signal from the DVD Receiver will be lead to the TV.
1.Press the TV button 0 on the remote control to turn the DVD Receiver on and select TV as the source. Also make sure that your video monitor connected to the HS 350 is switched on.
2.The TV monitor will show the TV Menu, as shown below. You can also select the TV Menu with the ARROW keys 9 on the remote control. Once the TV tab is highlighted, press ENTER 6 to access it.
If the HS controller is already in standby, you can also switch the unit on by pressing the TV button on the remote control.
Figure 14
The TV Menu contains the following settings. Follow the explanations in the Upper Menu Line on the bottom of your screen to change the settings.
Audio: Selects the Surround Mode you would like to use when listening to your TV or other video device connected to the Scart input.
TV Audio Input: With television sets having more and more audio outputs, this setting allows you to select the way the audio signal is routed from the TV to the HS 350.
PC Audio Input: In case the video signal of a PC is connected directly to a TV screen, the audio signal needs to be routed to the HS 350, to get the sound match the picture. This setting allows you to select the audio input to which the audio from the PC is connected.
Video Audio Input: In case the video signal of for instance a set top box is connected directly to a TV screen, the audio signal might need to be routed to the HS 350, to get the sound match the picture. This setting allows you to select the audio input to which the audio from the set top box is connected.
Note: In case the audio from a PC or set top box are routed through the TV to the HS 350, all three settings for TV Audio Input, PC Audio Input and Video Audio Input need to be identical.
26 TV MENU, AUX MENU, DIGITAL IN MENU
Level adjustment: This setting gives you the possibility to increase or decrease the input level of the TV, so that its sound will have the same level as the radio, the DVD player or the other audio inputs.
AUX MENU
In addition to the
1.Press the AUX button 0 on the remote con- trol to turn the DVD Receiver on and select Aux as the source. Also make sure that your video monitor connected to the HS 350 is switched on.
2.The TV monitor will show the AUX Menu, as shown below. You can also select the AUX Menu with the ARROW keys 9 on the remote control. Once the AUX tab is highlighted, press ENTER 6 to access it.
Figure 15
The AUX Menu contains the following settings. Follow the explanations in the Upper Menu Line on the bottom of your screen to change the settings.
Audio: Selects the Surround Mode you would like to use when listening to your additional ana- log audio source.
Level adjustment: This setting gives you the possibility to increase or decrease the input level of the analog input, so that its sound will have the same level as the radio, the DVD player or the other audio inputs.
DIGITAL IN MENU
In addition to all analog audio and video sources, the HS 350 also gives you the opportunity to connect two digital audio sources, for instance a digital
1.Press the D.IN button 0 on the remote control to turn the DVD Receiver on and select Digital In as the source. Also make sure that your video monitor connected to the HS 350 is switched on.
2.The TV monitor will show the D. IN Menu, as shown below. You can also select the D. IN Menu with the ARROW keys 9 on the remote control. Once the D. IN tab is highlighted, press ENTER 6 to access it.
Figure 16
The DIGITAL IN Menu contains the following settings. Follow the explanations in the Upper Menu Line on the bottom of your screen to change the settings.
Digital Input: Selects either the digital source connected to the coaxial or to the optical digital input as source to listen to.
Audio: Selects the Surround Mode you would like to use when listening to one of the digital audio sources.
Level adjustment: This setting gives you the possibility to increase or decrease the input level of the digital input, so that its sound will have the same level as the radio, the DVD player or the other audio inputs.
AV Sync Delay: If you have a digital video source or a digital video display that causes lack of lip sync you may use the A/V Sync adjust fea- ture to delay the audio signal as it is sent to all channels (as opposed to the individual settings) so that the picture and sound are brought back together. Adjustments can be made in steps of 5ms, from 0ms up to 50ms.
