HDS 2000 Super
6. Care and maintenance
GB
Always disconnect the appliance from the electric mains supply before carrying out any maintenance work.
•You can arrange a regular safety inspection with your dealer or take out a maintenance contract. Please ask for advice.
6.1SERVICE warning light is illuminated
•If certain maintenance work is required on the basis of elapsed operating hours, this warning light illuminates.
•Contact your Customer Service representative and arrange for maintenance to be carried out.
Required Maintenance Work
–Optical inspection
–Check
–Clean fuel tank and filter
–Check pump for leaks
–Change pump oil
–Clean strainer in water inlet on both float tanks
–Clean strainer before the
–Decarbonize heater element*
–Descale heater element*
–Clean/replace ignition electrodes*
–Clean/replace Burner nozzles*
–Adjust burner*
–Check pump overflow valve for leaks*
–Check
–Clean hand spray gun
–Check pressure damper*
*These maintenance tasks should be carried out by the Customer Service only.
25