WORKING WITH DETERGENTS
Detergents can only be applied at low pressure
Step 1 Install the Wash brush or the Vario spray wand. Set the Vario spray wand to the low pressure setting
Step 2 Fill a container with Karcher detergent. Place the filter end of detergent suction tube into the container.
For best results see Cleaning Tips on pages 8 & 9 for specific information on how to clean different surfaces.
Always Use Karcher Detergents for Best Results.
Karcher biodegradable detergents are specially formulated to protect the environ- ment and your pressure washer. Special formula won’t clog the suction tube filter
and will protect the internal parts of the 6 pressure washer for a longer life. For
Karcher Detergents, check your retailer or call:
1-800-537-4129
The following Karcher detergents are available:
• Vehicle Wash | • House Wash |
• Degreaser | • Deck Wash |
• All Purpose Cleaner |
|
Step 3 Turn on the pressure washer. Pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.
Caution
Never use:
•Bleach, Chlorine products and other corrosive chemicals
•Liquids containing solvents
(i.e., paint thinners, gasoline, oils)
•Tri-sodium phosphate products
•Ammonia products
•Acid-based products
These chemicals will harm the unit and will damage the surface being cleaned.
