Muratec MFX-C3035 manual Error messages, Status, error and service messages

Error messages

Warning messages

Message	Cause	Solution
[Unable to collate.]	There is not enough	After one copy is
[Prints one set only.]	space available on the	printed, the error is can-
	hard disk for collated	celed.
	printing.
[HDD is low on disk	There is too little	Delete downloaded
space.]	space available on the	fonts. Otherwise, initial-
[Delete unneeded file.]	hard disk.	ize the hard disk.
[Replace imaging unit.]	The time to replace	Replace the indicated
[Replace imaging unit.]	the imaging unit has	imaging unit.
	been reached.
[x]
[Replace toner (x)]	The time to replace	Replace the indicated
[Toner empty. Replace	the toner cartridge has	toner cartridge.
	been reached.
toner and close front door.
x]
[Replace image transfer	The time to replace	Replace the transfer
belt.]	the transfer belt unit	belt unit.
[Replace transfer belt unit.]	has been reached.	After replacing the
		transfer belt unit, reset
		its counter. For details,
		refer to “[Maintenance
		Menu]” on page 3-63.
[Replace fusing unit.]	The time to replace	Replace the fuser unit.
[Replace fusing unit.]	the fuser unit has	After replacing the fuser
	been reached.
		unit, reset its counter.
		For details, refer to
		“[Maintenance Menu]”
		on page 3-63.
[Replace waste toner	The time to replace	Prepare the new waste
box.]	the waste toner bottle	toner bottle.
[Prepare new waste toner	is near.
box.]

13-38 Status, error and service messages