Muratec MFX-C3035 manual Service messages, Status, error and service messages 13-45, Fax TX failed

Message	Cause	Solution
[I-Fax RX failed]	The job did not end	Check the log.
[Failed to complete the job	normally because an
due to an error while I-FAX	error occurred during
RX.]	I-FAX RX.
[Check the log.]
[I-Fax TX failed]	The job did not end	A document is sent
[I-FAX TX failed due to	normally because an	again after the specified
	error occurred during	time period has lapsed.
error.]
	I-FAX TX.
[Redial will be attempted
after predetermined time
progress.]

Service messages

These messages indicate a more serious problem that can only be corrected by a service representative. If one of these messages appears, turn the machine off, then on again. If the problem persists, contact your local vendor or authorized service provider.

Message	Cause	Solution
[Service Call]	An error has been	Restart the machine.
[Error occurred. Power	detected with the item	This often clears the
	indicated by “xxxx” in	service message, and
OFF and ON, or contact
	the service message.	machine operation can
Service with Trouble
		resume.
Code;xxxx]
		If the problem persists,
		contact the service rep-
		resentative.

Status, error and service messages 13-45