Muratec MFX-C3035 manual Using a Web Service, Settings required to use a Web Service

Using a Web Service

The scan command can be sent from a computer (Windows Server 2008 R2/ 7/Vista/Server 2008) on the network or this machine can scan using a speci- fied operation, and the scan data can be sent to a computer. The settings that must be specified in advance on the computer are described below.

Settings required to use a Web Service

The following settings are required in order to use a Web Service.

„Install this machine on the computer.

„Specify settings on the machine for using a Web Service.

" Specify the Web Service settings on the machine from the Admin Set- tings screen. For details, refer to the [Reference Guide].

Installing this machine on the computer

Confirmation before installation

Before installation, make sure that “Network Discovery” (Network and Shar- ing Center in Control Panel) is enabled.

Installation procedure

1 In the Start button menu, click “Network”.

The devices connected to the network appear.

2 Right-click the scanner icon for this machine, and then click “Install”.

–Depending on the settings specified on the computer, a UAC (User Account Control) message may appear. Check the information described in the message, and then continue with the procedure.

–If both scanning and printing using a Web Service have been enabled on this machine, this machine appears as a printer icon.

–The driver software is automatically installed. After a confirmation message appears, click [Close].

3 From the control panel of the machine, select “Web Service”, and then check that a destination appears.

9-12 Using a Web Service