Muratec MFX-C3035 manual Directly typing in the address, Selecting from the log

Press [OK].

In the initial Scan to E-mail mode screen, press [Direct Input].

3 Select the destination, and then press [OK].

" To specify multiple destinations, specify all destinations where the data is to be sent.

Selecting by searching for a destination type or name

Destinations can be selected by searching for their type or name.

1 In the initial Scan to E-mail mode screen, press		.
2	Press [Search].
3	Select the method to search for destinations.

–[Type]: Select the destination type (“Fax”, “E-mail”, etc.).

–[Name]: Directly enter the name of the destination to be searched for. Type in the name to be searched for, and then press [OK] to display a list of the search results.

4 Select the destination, and then press [OK].

–To specify multiple destinations, select all destinations where the data is to be sent.

5 Press [OK].

Directly typing in the address

To specify a destination that is not registered with the machine, directly type in the address.

1

2 Press [E-mail].

3 Type in the E-mail address.

4

" To specify multiple destinations, specify all destinations where the data is to be sent.

" If [Admin Settings] - [Security Settings] - [Security Details] - [Manual Destination Input] is set to [Restrict], an address cannot be directly typed in. For details on [Manual Destination Input], refer to “[Security Settings]” on page 3-70.

Selecting from the log

A destination can be selected from the log of the last five transmissions. 1 In the initial Scan to E-mail mode screen, press [Log].

Specifying destinations 10-15