Muratec MFX-C3035 manual Specifying destinations, Selecting from registered destinations

Specifying destinations

Use any of the following methods to specify destinations.

„“Selecting from registered destinations” on page 10-26

„“Directly typing in the address” on page 10-28

„“Selecting from the log” on page 10-31

Selecting from registered destinations

An address book destination or group destination can be selected from those previously registered on the machine.

" In order to select a registered destination, address book destinations and group destinations must first be registered on the machine. For details, refer to “Registering destinations” on page 10-33.

" In [User Settings] - [Machine Settings] - [Scan to E-mail Default Tab], you can specify the default destination tab in the Scan to E-mail mode screen. For details, refer to “[Machine Settings]” on page 3-13.

Selecting from the Favorites list

When destinations are registered, they can be specified as [Favorites].

As a default, the [Favorites] destination list appears when the initial Scan to E-mail mode screen is displayed.

Select a destination from the list. To specify multiple destinations for a broad- cast transmission, specify all destinations where the data is to be sent.

" The setting for the Favorites list can be specified for a destination when it is registered. For details, refer to “Registering an address book destination” on page 10-34.

Selecting with an index search

Destinations can be selected by searching for the index characters specified when each destination was registered.

1

2

In the initial Scan to E-mail mode screen, press . Press the desired index tab to search for destinations.

–If the desired index tab is not displayed, press [ ] or [ ] until the desired tab appears.

–To select a group destination, press [ ], and then press [Group] on the rightmost end.

10-14 Specifying destinations