Muratec MFX-C3035 manual Solving Problems with Printing Quality

Symptom	Cause	Solution
Colors are	Gradations are not	Set [Print Settings]/[Quality Settings]/
not register-	adjusted correctly.	[Gradation Adjustment]/[Tone Calibra-
ing properly;		tion] in the [Admin Settings] menu to
	The front cover is
colors are	opened during the	[ON], and then perform the AIDC color
mixed or		calibration. For details, refer to “[Print
	calibration.
have		Settings]” on page 3-49.
page-to-pag
	One or more of the	Remove the toner cartridges and
e variation.	toner cartridges may	check for damage. If it is damaged,
	be defective.	replace it.
	The media is moist	Remove the moist media and replace it
	from humidity.	with new, dry media.
The color	One or more of the	Remove the imaging units and check
has a poor	imaging units may be	for damage. If it is damaged, replace it.
reproduction	defective.
or has poor
color density.

If the problem is not resolved, even after all of the above have been per- formed, contact Technical Support with the error information.

13-36 Solving Problems with Printing Quality