Muratec MFX-C3035 manual Registering a user 15-3

3 Click [Apply] to save the settings.

4 In the [General Settings] page of [Authentication Device Settings], select [Authentication Type] and [IC Card Type].

–In [IC Card Type], specify the required IC card type.

–For [Authentication Type], specify how to log in to this machine after registration.

[Card Authentication]: Allows the user to log in by simply placing the IC card.

[Card Authentication + Password]: Allows the user to log in by placing the IC card and entering the password.

–For details on how to log in to this machine, refer to “Logging in to this machine” on page 15-16.

5 Click [Apply] to save the settings.

–If the card function setting page appears, specify the necessary set- tings.

6 Exit Web Connection.

Then, proceed with the user registration.

Registering a user

Register a user using Data Administrator. The following two methods can be used.

„Connect the authentication device to your computer, and use Data Admin- istrator to register the target user and card at a time.

„Connect the authentication device to this machine, and associate the user, who has been registered using Data Administrator, with an IC card.

Registering a user 15-3