„[Resolution] Specify the resolution.

„[Scale]

Specify the enlargement or reduction ratio for the selected area.

" If the resolution is set at 1200 × 1200dpi or higher, a setting larger than 100% cannot be specified.

„[Scanning Mode]

Select [Auto] or [Manual]. When [Manual] is selected, a tab appears so that detailed settings can be specified, for example, for [Brightness/Contrast], [Fil- ter], [Curves], [Levels], [Color Balance], and [Hue/Saturation].

" The parameters that can be set differ depending on the scanning mode that is selected.

" The detailed settings that appear differ depending on the setting selected for [Scan Type].

" If [Auto] is selected as the scanning mode, scanning from the original glass is performed after a prescan is performed so that a preview image can be checked.

„[Image size]

Shows the data size of the scan image.

„[Rotation]

Select the orientation of the image to be scanned.

" If the [Rotate back side] check box is selected, the back side of the image is rotated 180° and scanned. (Applies only if [ADF (2-sided)] is selected)

„[Auto Deskew]

Specify settings for correcting the skew of the image.

„[Close]

Click to close the TWAIN driver window.

„[Prescan]

Click to begin scanning a preview image.

„[Scan]

Click to begin scanning.

„[AutoCrop] icon

Click to automatically detect the scanning position based on the preview image.

9-10

Macintosh TWAIN Driver Settings

Page 211
Image 211
Muratec MFX-C3035 manual Macintosh Twain Driver Settings