Muratec MFX-C3035 manual Solving Problems with Media Misfeeds, Symptom Cause Solution

Solving Problems with Media Misfeeds

" Frequent misfeeds in any area indicate that area should be checked, repaired, or cleaned. Repeated misfeeds may also happen if you’re using unsupported print media or original media.

Symptom	Cause	Solution
Several	The front edges of	Remove the media and even up the
sheets go	the media are not	front edges, then reload it.
through the	even.
machine
	The media is moist	Remove the moist media and replace it
together.
	from humidity.	with new, dry media.
Media mis-	Front cover needs to	Open and close the front cover again.
feed mes-	be opened and
sage stays	closed again to reset
on.	the machine.
	Some media remains	Check the media path again to make
	misfed in the	sure that you have removed all of the
	machine.	misfed media.
Duplex mis-	Unsupported media	Use approved media. See “Special
feeds.	(wrong size, thick-	Paper” on page 4-11.
	ness, type, etc.) is
		Plain paper, recycled paper, special
	being used.
		paper, Thick 1 and Thick 2 can be
		autoduplexed if the media type is set
		properly in the driver. See “Specifica-
		tions” on page 4-2.
		Make sure that you have not mixed
		media types in the tray.
		Do not duplex, envelopes, labels, letter
		head, postcards, glossy media, or sin-
		gle side only paper.
	Media is still being	Check the media path inside the
	misfed.	duplex again to make sure that you
		have removed all of the misfed media.

Solving Problems with Media Misfeeds 13-23