Muratec MFX-C3035 manual Label, Do not use label sheets that

Label

A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet:

„The face sheet must follow the plain paper specification.

„The face sheet surface must cover the entire carrier sheet, and no adhe- sive should come through on the surface.

You can print continuously with label sheets. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time.

Check your application documentation for more information on printing labels.

Capacity	Tray 1/2	Up to 20 sheets, depending on their thick-
		ness
	Tray 3/4	Not supported
Orientation	Tray 1	Face down
	Tray 2	Face up
Driver	Label
Media Type
Duplexing	Not supported

Use label sheets that are

„Recommended for laser printing

DO NOT use label sheets that

„Have labels that easily peel off or have parts of the label already removed

„Have backing sheets that have peeled away or have exposed adhesive

" Labels may stick to the fuser, causing them to peel off and media misfeeds to occur.

Print Media 4-7