Muratec MFX-C3035 manual Thick Stock, Capacity Tray 1/2, Media Type

„Layered

„Adhesive

„Folded, creased, curled, embossed, warped, or wrinkled

„Perforated, three-hole punched, or torn

„Too slick, too coarse, or too textured

„Different in texture (roughness) on the front and back

„Too thin or too thick

„Stuck together with static electricity

„Composed of foil or gilt; too luminous

„Heat sensitive or cannot withstand the fusing temperature (180°C [356°F])

„Irregularly shaped (not rectangular or not cut at right angles)

„Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

„Acidic

„Any other media that is not approved

Thick Stock

Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock.

You can print continuously with thick stock. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time.

Capacity	Tray 1/2		Up to 20 sheets, depending on their thick-
			ness
	Tray 3/4		Not supported
Orientation	Tray 1		Face down
	Tray 2		Face up
Driver	Thick 1	(91–150 g/m²)
Media Type	Thick 2	(151–210 g/m²)
Weight	91 to 210 g/m²
Duplexing	Refer to “Specifications” on page 4-2.

Print Media 4-5