Muratec MFX-C3035 manual Status, error and service messages, Operator messages

Message	Cause	Solution
[The USB device is	An incompatible USB	Disconnect the USB
invalid.]	device is connected to	device from the USB
[Disconnect USB device.]	the USB HOST port.	HOST port.
[IEEE802.1x Auth. failed]	IEEE 802.1X port	Turn the machine off,
[Please reboot.]	authentication timed	then on again.
	out.
[IEEE802.1x	IEEE 802.1X port	If authentication is suc-
Authenticating]	authentication is being	cessful, the message is
[Please wait.]	performed.	cleared.
		If authentication times
		out, turn the machine
		off, then on again.

Operator messages

Message	Cause	Solution
[Configuration of Options	An optional lower	Turn the machine off,
Changed]	feeder unit was	wait a few seconds, and
[Configuration of Options	installed or removed	then it on again.
	while the machine is
Changed]
	on.
[Power Off and ON.]
[Cover Open]	The cover is open.	Close the indicated
[Cover is open.]		cover.
[Close all covers properly.]
[Misfeed Detected]	A media misfeed	Open the indicated
[Misfeed was detected.]	occurred.	cover, and remove the
		misfed media.
[Remove the paper.]
[Imaging Unit Missing]	No imaging unit is	Install the correct imag-
[Install imaging unit and	installed. Otherwise,	ing unit.
	an imaging unit
close all doors.]
	incompatible with the
	machine has been
	installed.

13-40 Status, error and service messages