Muratec MFX-C3035 manual Specifying destinations 10-27, Selecting from the Favorites list

Selecting from the Favorites list

When destinations are registered, they can be specified as [Favorites].

As a default, the [Favorites] destination list appears when the initial Scan to Folder mode screen is displayed.

Select a destination from the list. To specify multiple destinations for a broad- cast transmission, specify all destinations where the data is to be sent.

" The setting for the Favorites list can be specified for a destination when it is registered. For details, refer to “Registering an address book destination” on page 10-34.

Selecting with an index search

Destinations can be selected by searching for the index characters specified when each destination was registered.

1

2

3

In the initial Scan to Folder mode screen, press . Press the desired index tab to search for destinations.

–If the desired index tab is not displayed, press [ ] or [ ] until the desired tab appears.

–To select a group destination, press [ ], and then press [Group] on the rightmost end.

Select the destination, and then press [OK].

–To specify multiple destinations, specify all destinations where the data is to be sent.

Selecting by searching for a destination type or name

Destinations can be selected by searching for their type or name.

1 In the initial Scan to Folder mode screen, press		.
2	Press [Search].
3	Select the method to search for destinations.

– [Type]: Select the destination type (“FTP”, “SMB”, “WebDAV”, etc.).

4

5

–[Name]: Directly enter the name of the destination to be searched for. Type in the name to be searched for, and then press [OK] to display a list of the search results.

Select the destination, and then press [OK].

–To specify multiple destinations, select all destinations where the data is to be sent.

Press [OK].

Specifying destinations 10-27