Muratec MFX-C3035 manual Authentication Setting,  All factory default values are shown in bold

[Group]		Specify settings for printing the list of group
		destinations.
		[Start Number]: Specify the starting group des-
		tination number.
		[Number of Addresses]: Specify the number of
		group destinations.
		[List Output]: Prints the list of group destina-
		tions.
[Program]		Specify settings for printing the list of program
		destinations.
	[Fax]/[E-mail]/[FTP]/	[Start Number]: Specify the starting program
	[WebDAV]/[SMB]/	destination number.
	[Internet Fax]/	[Number of Addresses]: Specify the number of
	[Address Book]/
		program destinations.
	[Group Address]
		[List Output]: Prints the list of program destina-
		tions.

[Authentication Setting]

" All factory default values are shown in bold.

Item	Description
[User List Display Setting]	Settings	[ON] / [OFF]
	Select whether or not to display a user list.
[Logout Confirmation	Settings	[ON] / [OFF]
Display]
	Select whether or not a logoff confirmation
	message appears after the [Access] key is
	pressed.
[Card Authentication]	Displayed only when the authentication device
	is connected, and used to register IC card
	information for the user.
	For details, refer to “Authentication unit (IC
	card type)” on page 15-1.

3-44 [Admin Settings]