Muratec MFX-C3035 manual Solving Problems with Media Misfeeds, Adf

Symptom	Cause	Solution
Media is mis-	The loaded document	Load the correct document. For details
fed in the	does not meet the	on the documents that can be loaded,
ADF.	specifications.	refer to “Documents that can be loaded
		into the ADF” on page 4-34.
	The loaded document	Load the document so that it does not
	exceeds the maxi-	exceed the maximum capacity. For
	mum capacity.	details on the documents that can be
		loaded, refer to “Documents that can
		be loaded into the ADF” on page 4-34.
	The document guides	Slide the document guides against the
	were not slid against	edges of the document. For details on
	the edges of the doc-	loading the document, refer to “Load-
	ument.	ing a document into the ADF” on
		page 4-37.
Media is mis-	The media is not cor-	Remove the misfed media and reposi-
feeding.	rectly positioned in	tion the media properly in the tray.
	the tray.
	The number of sheets	Remove the excess media and reload
	in the tray exceeds	the correct number of sheets in the
	the maximum	tray.
	allowed.
	The media guides are	Adjust the media guides in the Tray 1
	not correctly adjusted	to match the size of the media.
	to the media size.
	Warped or wrinkled	Remove the media, smooth it out, and
	media is loaded in the	reload it. If it still misfeeds, do not use
	tray.	that media.
	The media is moist	Remove the moist media and replace it
	from humidity.	with new, dry media.
	Envelopes are loaded	Envelope must be loaded in Tray 1
	in Tray 2, 3, 4.	only.
	Labels, letterhead,	Labels, letterhead, postcards, thick
	postcards, thick	stock, or glossy must be loaded in Tray
	stock, or glossy are	1 or 2.
	loaded in Tray 3, 4.
	Custom-sized media	Custom-sized media can be loaded in
	is loaded in Tray 3, 4.	Tray 1 or 2.
		See “Print Media” on page 4-2.

13-24 Solving Problems with Media Misfeeds