Muratec MFX-C3035 Specifying destinations 10-31,  Only one program destination can be selected

Select the desired program destination from the list, and then press [OK]. The settings and destination addresses are recalled.

" If [Admin Settings] - [Security Settings] - [Security Details] - [Manual Destination Input] is set to [Restrict], an address cannot be directly typed in. For details on [Manual Destination Input], refer to “[Security Settings]” on page 3-70.

" With a Web Service transmission, only one destination can be speci- fied.

" With WSD scanning on Windows Server 2008 R2/7/Vista/Server 2008, it may not be possible to specify a resolution or document size.

Selecting from the log

A destination can be selected from the log of the last five transmissions.

1

2

In the initial Scan to Folder mode screen, press [Log].

Select the destination from the list, and then press the [Start] key.

"

"

Only one destination can be selected from the log.

The only destinations that appear in the log are those specified after pressing [Manual Destination Input].

In addition, destinations specified with broadcast transmissions do not appear in the log.

Selecting a program destination

Data can be sent with a program destination previously registered on the machine.

Program destinations are registered with destinations where data is fre- quently sent together with scan settings allowing data to easily be sent with- out the trouble of specifying the various settings.

" In order to select a program destination, the program destination must first be registered on the machine. For details, refer to “Registering a program destination” on page 10-36.

1 Press [Scan to Folder] to display the initial Scan to Folder mode screen. 2 Position the document to be scanned.

–For details on loading the original document, refer to “Loading a Docu- ment” on page 4-36.

3 Press the [Mode Memory] key.

4

" Only one program destination can be selected.

Specifying destinations 10-31