Muratec MFX-C3035 manual Status, error and service messages 13-41

Message	Cause	Solution
[Toner Cartridge Missing]	No toner cartridge is	Install the correct toner
[install toner cartridge and	installed. Otherwise, a	cartridge.
	toner cartridge
close all doors.]
	incompatible with the
	machine has been
	installed.
[Waste Toner Box Full]	The waste toner bottle	Replace the waste
[Replace waste toner box	is full.	toner bottle.
by following the instruc-
tion.]
[Replace Imaging Unit]	The time to replace	Replace the appropri-
[Open front door and	the imaging unit has	ate imaging unit.
	been reached.
replace imaging unit by
following the instruction.]
[Replace Toner (x)]	The time to replace	Replace the appropri-
[Replace toner by following	the toner cartridge has	ate toner cartridge.
	been reached.
the instruction and close
front door.]
[Paper Size Mismatch]	The paper size speci-	Load paper of the cor-
[Load xxx in Tray x or can-	fied from the touch	rect size into the indi-
cel job.]	panel is different from	cated paper tray.
	the size of paper
		Otherwise, cancel the
	loaded in the paper
		job.
	tray.
[Paper Setting for Manual	Tray 1 has been	Press [Print]. Other-
feed]	selected for printing.	wise, cancel the job.
[Load xx xxxx in bypass
tray. Touch [Print].]
[Replenish paper]	No other paper tray	Load the specified
[Replenish paper or select	contains paper	paper into a paper tray.
other paper tray.]	matching the specified
	type and size. (when
	[Auto Tray Switching]
	is set to [ON])
[Replenish paper]	There is no paper in	Load paper into Tray 1.
[Load paper in bypass tray	Tray 1 when printing
or select other paper tray.]	with Tray 1 selected.
	(when [Auto Tray
	Switching] is set to
	[OFF])

Status, error and service messages 13-41