Muratec MFX-C3035 manual Specifying destinations, With HDD, With Web Service Settings

Press [OK].

In the initial Scan to Folder mode screen, press [Direct Input].

" If [Admin Settings] - [Security Settings] - [Security Details] - [Restrict Scan to USB] is set to [Restrict], [USB Memory] is not available. For details on [Restrict Scan to USB], refer to “[Security Settings]” on page 3-70.

" With a USB Memory transmission, only one destination can be speci- fied.

With [HDD]

1

2 Press [HDD].

3 Press [Save Document].

4 If user authentication settings have been specified, select [Public] or [Pri- vate].

5 Specify a setting for [Document Name].

6

" If [Admin Settings] - [Security Settings] - [Security Details] - [Manual Destination Input] is set to [Restrict], an address cannot be directly typed in. For details on [Direct Input], refer to “[Security Settings]” on page 3-70.

"

"

With an HDD transmission, only one destination can be specified.

Scan data saved on the hard disk can be saved to a computer by copying it with Web Connection. For details, refer to the [Reference Guide].

With [Web Service Settings]

With a Web Service transmission, scan data can be sent to a previously reg- istered network computer.

Network computers where this machine is registered as a Web Service scan- ner appear as destinations. Select a destination.

1 In the initial Scan to Folder mode screen, press [Direct Input].

2 Press [Web Service Settings].

3 Select the destination.

–If the desired destination is not displayed, press [Search], and then type in the destination name to be searched for.

10-30 Specifying destinations