Muratec MFX-C3035 manual Logging in to this machine

Associating the user with card using authentication device

When a user and card ID have been registered using Data Administrator, the user must be associated with the card in the Administrator Settings of the machine.

1 Press [Utility/Counter] key on the control panel of this machine to switch to the [Admin Settings] screen.

2 Press [Authentication Setting].

3 Press [Card Authentication].

4 Select a user to be registered, and press [OK].

–Press [All] to display all users. Press [Search] to extract target users with search characters.

5 Press [Edit].

–Press [Delete] to cancel the registration when IC card information is already registered.

6 Place the IC card on the authentication device, and press [OK].

–This associates the user with the IC card and registers the IC card for the user.

Logging in to this machine

The following explains how to log in to this machine with IC card authentica- tion.

„To perform IC card authentication, register the information recorded in the IC card in advance.

„If an authentication failure recurs, the problem may be due to incorrect registration of IC card information. Register IC card information again.

„When [Card Authentication] is specified for [Authentication Type], a regis- tered user is authenticated by simply placing the IC card. When [Card Authentication + Password] is specified, a registered user is authenticated by placing the IC card and entering the password.

„Press [User Name] and [Password] to log in by entering the user name and the password, without using the authentication device.

15-16 Logging in to this machine