Muratec MFX-C3035 manual Selecting a program destination, Specifying destinations

Select the desired program destination from the list, and then press [OK]. The settings and destination addresses are recalled.

2 Select the destination from the list, and then press the [Start] key.

"

"

Only one destination can be selected from the log.

The only destinations that appear in the log are those specified after pressing [Direct Input].

In addition, destinations specified with broadcast transmissions do not appear in the log.

Selecting a program destination

Data can be sent with a program destination previously registered on the machine.

Program destinations are registered with destinations where data is fre- quently sent together with scan settings allowing data to easily be sent with- out the trouble of specifying the various settings.

" In order to select a program destination, the program destination must first be registered on the machine. For details, refer to “Registering a program destination” on page 10-36.

1 Press [Scan to E-mail] to display the initial Scan to E-mail mode screen.

–For details on the initial Fax screen, refer to “Initial Scan to E-mail mode screen” on page 2-9.

2 Position the document to be scanned.

–For details on loading the original document, refer to “Loading a Docu- ment” on page 4-36.

3 Press the [Mode Memory] key.

4

" Only one program destination can be selected. 5 Press the [Start] key.

–Press the [Start (Color)] key to scan in color, or press the [Start (B&W)] key to scan in black and white.

10-16 Specifying destinations