Installing the Canopy and Canopy Trim Ring

5 • Installing the Canopy and Canopy Trim Ring

5-1.	Partially install two canopy screws (about 2 full turns) in the	Steps 5-1 – 5-2	Hanger Bracket
	hanger bracket.
5-2. Raise the canopy over the hanger bracket (For low profile
	installations, you will need to remove the canopy from the hook
	first). Align partially installed screws with key slots in canopy.
5-3.	Twist canopy clockwise to secure.
5-4.	Install third canopy screw in round hole on canopy. Securely	Canopy	Canopy Trim
	tighten all three screws.	Canopy	Ring
	tighten all three screws.		Ring
5-5.	Using both hands, push the canopy trim ring up to the top of the
	canopy. e canopy trim ring will snap and lock into place.

Should you need to remove the canopy trim ring, follow these steps:

1.Locate the tab indicators, small bumps on top of tabs.

2.Press firmly on opposite sides of the ring towards the canopy. e tabs will flex out releasing the trim ring from the canopy

Step 5-3

Steps 5-4 – 5-5

Canopy Screw

42012-01 • 03/09/05

Hunter Fan Company