Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).
6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.
6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. is is normal.
6-3. Remove the blade mounting screws and rubber shipping bumpers from the motor.
Note: In order to attach each blade, you will need to rotate the motor until the two screw holes for the blade are visible through the cutaway.
6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws.
Steps 6-1 – 6-2
